This clamp set makes building picture frames quick, accurate, and repeatable. Other sets get close, but we wanted to offer improved reliability at a more affordable price.

We also wanted it to last. So we chose materials that stand up to repeated use time and time again.

The corner brackets are 3D printed in carbon fibre reinforced composite plastic with precisely aligned brass threaded inserts. The corners naturally pull tight to give you perfect, clean joints, with as little fiddling as possible.

Each set is supplied in a custom laser-cut, foam-lined box and all rods and thumb wheels are individually checked and/or deburred after machining to ensure a smooth, precise fit.

All kits (including the 'No Rods' kits) come with the corner blocks, thumb wheels, and washers as standard.

Picture Frame Clamp Sizing

Mini

M4 Rods - 0.7mm Thread Pitch

7mm height blocks

Small / Medium / Large / Extra Large

M6 Rods - 1mm Thread Pitch

21mm height blocks

MAX

M10 Rods - 1.5mm Thread Pitch

31mm height blocks

All 'No Rods' kits come with all the necessary blocks, thumb wheels, washers, and packaging. The only thing they are missing are the rods, to either source yourself or add to a kit you already have.

Tips for Consistent Results

Apply low-tack masking tape to the internal faces of the clamp blocks to reduce glue build-up and simplify cleaning.
Always clamp on a flat, rigid surface with both the profiles and the clamps bearing firmly against it to maintain accurate 90° mitres.
Dry-assemble the frame and test fit the clamps before applying glue.
Wipe away squeeze-out immediately while the glue is still wet.
Avoid over-tightening. Apply firm, even pressure only.
Ensure mitres are accurately cut and square before clamping; clamps cannot correct poor cuts.
Keep clamp faces clean and free from hardened adhesive between uses.
Use even pressure on all corners to prevent racking.
Allow sufficient curing time before removing clamps.

Please Note

The rods are not stored inside the box. Most users store the rods vertically using the supplied hook-and-loop cable tie.
We offer the Extra Large variant of the products, not because of the frame sizes it can make, but rather the variety of options it provides with multiple lengths of rods and connectors.

Looking for a full kit including the wood, acrylic, backboard, etc. for your picture frames? Check out our Complete Picture Framing Kit here.

Country/region

Picture Frame Clamps with Rods

Sort by:

1 product

Sort

Picture Frame Clamps

Picture Frame Clamps