Optional plans are available to those who don't want to draw their own design and instead replicate my processes and measurements exactly. For more info, read about the online school.
In this quick video, I will brief you on the project ahead so that you know what to expect and can get the most from this course. Many resources are available at your fingertips so don't miss the opportunity to make the most of them!
Unsure you have all the right tools for the project? This handy guide helps you choose not only the tools you need, but also gives my recommendations in order of preference. It also provides various options to suit different budgets.
Want to start this project on the right foot? Purchase pre-machined timber in a variety of materials here. Perfect for those who want to avoid the fuss and get stuck straight into the project!
In this video, I will show you how to edge joint the side panels for the cabinet using a different method to what we covered in the dovetail box project.
In this part, I will show you how to cut the rebate to accept the back panel. We'll be covering a number of techniques to ensure you get the most from this lesson.
In this lesson, I show you how to layout and cut the lapped dovetails for the carcass joinery. This is a slightly different layout to a traditional dovetail and isn't something to miss!
In this lesson, I show you how to make and fit the drawer runners at the base of the carcass. This is a fiddly task that introduces new skills to your arsenal.
In this lesson, I show you how to layout and cut the groove / dado within the inside of the cabinet carcass using both hand tool and power tool methods!
In this lesson, I show you how to cut the tongue that is due to fit within the groove. To avoid a very unstable and wobbly shelf, it's important to get a good fit here!
In this lesson, I show you how to glue the carcass to ensure it's square. Because getting this step wrong will cause you a whole host of problems later down the line!
In this lesson, I show you how to apply profiles to the edges of the top and bottom panels. As well as show you how to use pilot and clearance holes to screw them to the carcass.
In this lesson, I show you how to cut the mortices for the frame and panel door. We are working on thin components here so attentional to detail is key.
Now that the frame is complete, it's now time to fit a door panel. In this lesson I will discuss materials to be used and the different options available to you.
In this lesson, I show you how to accurately hinge the door within the carcass. This is a very valuable skill to have and there is lots of supporting resources available here.
Next, we are moving onto the drawer components. In this lesson, I will show you how to accurately size the components for a piston fit drawer.
In this video, we re-visit lapped dovetails and get the joinery cut for the front of the drawer. I will be detailing layout, cutting and fitting all in one video.
In this lesson, I show you how to layout and cut a very odd set of dovetails that are commonly used on the back of traditionally constructed drawers.
How that the drawer has been glued, it's time to fit it within the carcass. In this video, I show you how to achieve the highly sought after piston fit finish.
In this lesson, I show you how to make and attach the drawer stops that prevent the drawer from disappearing into the carcass and getting stuck.
The bottom plinth is slightly different to the top plinth in that it's made of lipped man-made board. This allows you to put your mitring skills into practice again!
In this lesson, I show you my process when it comes to finishing the cabinet carcass and the traditionally fitted door and drawer. Can you guess what finish I intent to use?
The Collins Complete Woodworkers Manual helped me tremendously when beginning woodworking and I've been recommending it to my viewers and students for years. I'm yet to hear a bad review from them.
Simply enter your details below to unlock the hidden potential in your workbench.
(Book will be sent to your email inbox)