Toolbox Project Pack – Oak

This is a pack that includes all the pre-planed timber required to make a Toolbox.

It consists of:

4 x Sides (Supplied in 3 lengths. Cut one in half to create short sides)
4 x T&G Slats
4 x Tray Sides
1 x Tray Supports (Pair)
1 x Lid
1 x Hardware Pack (Brackets, threaded inserts, screws etc)

Parts are supplied oversized to be cut down and squared according to the dimensions listed on the plans.

__________

Important Information

We aggregate orders over the duration of 30 days prior to dispatch.
Learn More Here

__________

£192.60

Out of stock

Toolbox Project Pack – Oak

This is a pack that includes all the pre-planed timber required to make a Toolbox.

It consists of:

4 x Sides (Supplied in 3 lengths. Cut one in half to create short sides)
4 x T&G Slats
4 x Tray Sides
1 x Tray Supports (Pair)
1 x Lid
1 x Hardware Pack (Brackets, threaded inserts, screws etc)

Parts are supplied oversized to be cut down and squared according to the dimensions listed on the plans.

__________

Important Information

We aggregate orders over the duration of 30 days prior to dispatch.
Learn More Here

__________

£192.60

Out of stock

Description

This is a pack that includes all the pre-planed timber required to make a Toolbox.

This project pack consists of:

4 x Sides (Supplied in 3 lengths. Cut one in half to create short sides)
4 x T&G Slats
4 x Tray Sides
1 x Tray Supports (Pair)
1 x Lid
1 x Hardware Pack (Brackets, threaded inserts, screws etc)

Parts are supplied oversized to be cut down and squared according to the dimensions listed on the plans.

Sheet Material Thickness
The plywood in this pack (for the toolbox tray) is 6.5mm thick which was intentionally chosen to account for our international audience. If you are cutting ¼” (6.35mm) grooves for this project, by the time you sanded and smoothed the plywood, you should find that it will fit quite well. If however you are using metric cutters, you will either need to do two slightly offset passes to create the required width, or you can plane/sand the plywood down to the required thickness. The latter isn’t ideal but can be a solution if required.

__________

Important Information

To avoid us machining packs to order, we aggregate orders over the duration of 30 days so they can be machined in one large batch. This allows us to be more efficient with material and our time, which in turn brings the cost to you down significantly.

At the end of the countdown, the orders from that month will be machined and sent out a few days later. If you miss the countdown, your order will be sent at the end of the following month.

__________

Additional information

Weight 10000 g
Dimensions 47 × 25 × 20 cm

Download My

Free eBook!

Simply enter your details below to unlock the hidden potential in your workbench!

(Book will be sent to your email inbox)